Jennifer’s Two-Faced Medallion
Dutch artist Jennifer Hoes has recently 3D printed a very nice set of stainless steel medallions at i.materialise. The medallions showcase the many faces of the artist in an attempt to remind us of the many faces that we create for ourselves in these modern times. We create our different identities towards the outside world on a daily basis. From the face we show at work, to the face we put on at home, to the face we hide behind when we’re online. It was this interesting fact of life that brought Jennifer to the Roman God Janus, famous for his two faces that represented the balance in society and who became the main inspiration for this work of art.
Jennifer shares five of her expressions with us: happiness, anger, sadness, fearful and neutral. The happiness and anger expressions are facing outwards while the mirrored image can be admired on the medallion’s inside. The neutral expression has been 3D printed on the medallion’s edge as a barrier between the two opposite expres
And the Winner is…
The Peeters & Pichal challenge has come to an end and together with the Radio 1 jury members we’ve come to our decision on a winner. As with all challenges, it’s never easy to choose the winning design, but as we all knew… there could only be one…
…and that winner is the Dutch designer Ricardo de Koning with his stylish Design for your Flowers.
Our winner was in search of a nice vase that could match the modern interior of their house but ended up finding the same old traditional vase designs everywhere he went. Nothing really stood out and his search was getting him nowhere until he stumbled upon this challenge. It was the perfect opportunity to remind us of the power of 3D printing. So instead of buying a simplistic vase, Ricardo took it upon himself to participate in this challenge and design the perfect vase that would match the look of their home. He decided to dedicate the vase to his mother. For those who speak Dutch, you can listen to the interview between Belgian Rad
Meet the Team: Dmitriy
Hi everyone, I’m Dmitriy or you can also call me Dima. I’m the part of the team that makes sure your models are printed as nice as possible, who clarifies your questions and keeps you happy.
I’m quite new in the world of 3D printing. I’ve started working at i.materialise roughly half of a year ago, but I have learned a lot since then. It was so fascinating to discover the technologies and materials, to see the possibilities of it. Like our teammate Franky said, 3D printing sounds like the coolest thing in the world. I totally agree. And I’m willing to share all the knowledge with all of you guys: talented designers, creative people and simply everyone who is interested in 3D printing.
In my work I get most of the pleasure when I see a 3D printed model which has a part that was somehow fixed or improved thanks to our support service in cooperation with the designer. In such case I see the results of work and when I realize that this is absolutely nice, I’m really glad. I also like
Pretty enough for flowers, nerdy enough for CH3CH2OH – the Sintervase
One service offered by our parent company, Materialise, is the generation of sinterboxes: web-like boxes that are 3D printed around parts for easy identification and safe shipping. Although made with functionality in mind, it turns out that these handy little boxes are also quite attractive…which got us thinking.
To make a long story short, the Sintervase was born! Designed to hold a standard test tube, an active imagination is sure to see the possibilities:
- A beautiful vase for a single rose or an equally charming flower
- The ultimate chemistry lab design accessory, putting mere test tube racks to shame
- And, for those who recognize the equation above, fill ‘er up and try out this game
Order one for yourself in our gallery and enjoy!
Treat your Christmas tree to some “free” 3D Printed Decorations
Christmas is coming and with it comes the fun of decorating your Christmas tree at home. Yes… it’s that time of the year where you take the decoration box out of the closet to dress your tree. But aren’t you tired of always seeing the same kind of decoration hanging on your tree year after year? Wouldn’t it be great if you could give it some designer’s touch? Make it feel pretty and special for this year? I can see your tree nodding and smiling already, so we’ve decided to give you the opportunity to treat it to some exclusive 3D printed designs.
For this Christmas, we have a collection of 3D printed decorations available for you in our online gallery. Better yet, we are giving a Christmas item out of our collection for free with each order at a value of 50 euro and above (shipping and VAT costs NOT included) that you place with us. And as with all collections, people often want to complete the set, so we’ve also made our entire collection available through our online gallery and at
Materializing the City of Dreams: Sagalassos
Sagalassos is an archeological site in southwestern Turkey under the supervision of Professor Marc Waelkens from the Catholic University of Leuven. It is a tremendous archeological research project that started in 1990 and has exposed us to many of the hidden treasures from the city’s intriguing past. To celebrate the great work that has been done on this project, the Gallo Roman Museum in Tongeren, Belgium decided to exhibit many of the found treasures including a fully reconstructed miniature model of the
ancient city.
Got inspir
Brave New World with Stephen Hawking featuring Materialise
We are proud to announce that our mother company Materialise will be featured in an upcoming episode of ‘Brave New World with Stephen Hawking’, a Channel 4 documentary series during which “Professor Stephen Hawking examines how science is striving for humankind”s next leap forward”. So, for those of you who are living in the UK, be sure to set your DVRs because you will not want to miss a minute of this show. The episode will air on Monday the 31st of October at 8pm on Channel 4. Although airing on Halloween, we promise you that the only thing scary about the show is how much further technology has come than many expect.
Filming took place at Materialise’s Belgian Headquarters earlier in the year and we are excited to finally see the result of what proved to be an exciting day of shooting. Materialise is being featured in the third episode of the series entitled: Technology. It will be designer Max Lamb who will guide viewers through the world of 3D printing and who will give y
Looking back at the 3D Printing Event in Eindhoven
Yesterday I visited the one-day 3D Printing Event that ran as part of the Dutch Design Week (22-30 Oct) in Eindhoven, the Netherlands. I was there to catch a glimpse of what others were doing with 3D printing and how it was being used by the public at home.
The event attracted companies like Ultimaker, A1 Technologies and Origo amongst many others to showcase their latest ideas and products to the public. 3D printing at home was set as the main theme of the event and the adequate printing machines were there to showcase their quality and possibilities.
Clearly present was the Dutch based company Ultimaker who managed to impress with their fast and qualitative kit 3D printers. They are great contributors to the spreading of 3D printing at home in which they might help to stimulate that much-needed price drop that thousands of hungry home designers are waiting for. Whatever your opinion on the price of an affordable 3D printer may be, one thing is sure… they are definitely a compan
Tips & Tricks for working with Polyamide
Polyamide is one of the most popular materials amongst our designers due to its creative flexibility. It gives them the creative freedom they often seek at an affordable price. We already provide basic information about this material on our website but because we love our designers, we decided to share the four most useful tips from our past experiences.
Tip 1: How to hollow out your designs
Even though it isn’t a requirement to hollow out your 3D prints, it is often advised in many cases. This can be useful to avoid deformations and discolorations during the printing process. There are two options you can follow… You can either keep the polyamide powder inside the hollow structure or you can design a strategically placed hole (two is even better) for the powder to escape once your work is 3D printed.
Also don’t forget that Polyamide isn’t really made for designing big flat plains the size of an A4 page because the chance of deformation is quite big. Even if you hollow out
Impressions from 3D printed .MGX designs at the Victoria and Albert Museum in London
Our creative sister division MGX has recently exhibited some amazing 3D printed works of art at the V&A in London. This attracted thousands of culture-hungry attendees which resulted in a 20-day extension of the original exhibition dates. As with all exhibitions, the show must end some day and for .MGX that day was the 15th of October of 2011. However, that doesn’t mean that we didn’t think about all those of you who couldn’t make it to view the exhibition.
Especially for you, we have decided to share our impressions on this blog. May it inspire you to be our next great designer to showcase at such a lovely venue.
Escapism Tunic by Iris van Herpen ©Victoria and Albert Museum, London
SOLID C1 Chair & SOLID T1 table by Patrick Jouin ©Victoria and Albert Museum, London
Trunk by Peter Marigold ©Victoria and Albert Museum, London
Fractal- T by Platform Studio & Matthias Bär ©Victoria and Albert Museum, London
The One_Shot.MGX by Patrick Jouin ©Victoria and Albert Muse
