by GT Models
Description
This is a model of pile breaker in 1:50 scale, made by 10 single elements and 10 assemby pins. Each element has two holes to allow the passage of a 1 mm diam. rubber wire (to simulate hydraulic line). There is also an eyebolt for chains or rope (the passage has 2,5 mm diameter).
Each element has to be cut from the supports then cleaned from the printing supports. You have to use a cutter or a surgical blade , after that it can be necessary to sand with fine sandpaper.
No wash or chemical treatment is needed, once removed the supports you can use the primer (if you prefer) or directly paint the parts.
It can be hooked to a crane or an excavator, to break the first part of foundation piles, uncovering the steel rebar.
Share or Embed
