circle raptor skewb p1

Description

Here's the circle raptor skewb. This puzzle came about by wanting to see if I could add a large circle on each side of my raptor skewb puzzle in the same way that I did to that of the raptor cube. The biggest challenge to making this concept work was in making sure the additional circle cuts wouldn't cause any internal bandaging when making a skewb turn while also making sure the puzzle wouldn't become unstable which resulted in a rather complex mechanism. Anyway, I'm quite happy with how it turned out.

In order to assemble this puzzle, you will also need: https://i.materialise.com/en/shop/item/skewb-core-0p8 and https://i.materialise.com/en/shop/item/circle-raptor-skewb-p2

IMPORTANT: If you want to order this design using a dyed material, you will need to add the following instructions for the order to go through: I am aware of and accept the risk to ordering a dyed material on an order with a sinter box.

Here is the sticker design you'll need for this puzzle: https://www.dropbox.com/scl/fi/fvhoi4iax2d6skao2diu9/circle-raptor-skewb.DXF?rlkey=16owmurg6uzlo6td5b1mj96zq&dl=0 which can be used to order from https://oliverstickers.com/index.php?route=product/product&product_id=570 or by sending an email through the contact info on this site. https://www.chewiescustompuzzles.com/contact