6 layer face turning octahedron v2 p1

Description

Here is the 6 layer face turning octahedron v2 which has 6 logical layers per face using slightly deeper cuts than the original face turning octahedron

IMPORTANT: If you want to order this design using a dyed material, you will need to add the following instructions for the order to go through: I am aware of and accept the risk to ordering a dyed material on an order with a sinter box.

To assemble this puzzle, you will also need: https://i.materialise.com/en/shop/item/skewb-core-0p8, https://i.materialise.com/en/shop/item/6-layer-face-turning-octahedron-v2-p11, and https://i.materialise.com/en/shop/item/6-layer-face-turning-octahedron-v2-p12

Here is the sticker design you'll need for this puzzle: https://www.dropbox.com/s/u3lrxcupa9yxshk/6%20layer%20fto%20v2.DXF?dl=0 which can be used to order from https://oliverstickers.com/index.php?route=product/product&product_id=570 or by sending an email through the contact info on this site. https://www.chewiescustompuzzles.com/contact 

These are the screws I used for this puzzle. https://www.amazon.com/gp/product/B000NHXOCG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1  This puzzle was also designed to give room for springs which will improve the turning quality. I recommend the springs here: https://www.amazon.com/dp/B094DDQML8?psc=1&ref=ppx_yo2_dt_b_product_details and washers here https://www.amazon.com/dp/B015A39NCC?psc=1&ref=ppx_yo2_dt_b_product_details