Natural
The natural surface of polyamide has a sandy, granular look, and is slightly porous.
Dyeing
To color polyamide, we submerge your model into a bath containing color pigment. This dyeing process is also referred to as pigmentation or impregnating.
This finish is available in Yellow, Orange, Red, Bordeaux, Green, Blue, Petrol Blue, Purple, Brown and Black.
As with most post-production processes, extra labor is required and this will add 1 working day to the lead time.
The color of dyed polyamide models may vary slightly.
Satin
The satin finish is achieved with a blasting process, giving the surface of your model a uniform color and satin smooth look.
This finish is available in Yellow, Orange, Red, Bordeaux, Green, Blue, Petrol Blue, Purple, Brown and Black.
As with most post-production processes, extra labor is required and this will add 2 working days to the lead time.
The color of satin polyamide models may vary slightly.
Polishing
It’s possible to polish and dye your 3D-printed model to create smooth and colored objects. Polishing and dyeing is a finishing technique that combines two consecutive steps, namely polishing and then dyeing. To polish models, we use a mechanical smoothing process. Your model is put into a tumbler with pebbles that smooth your model while the tumbler vibrates at a high frequency. To color models, we use a dyeing process where your model is submerged into a bath containing color pigment. Colors will appear lighter than regular dyed models.
This finish is available in Yellow, Orange, Red, Bordeaux, Green, Blue, Petrol Blue, Purple, Brown, Black and White.
As with most post-production processes, extra labor is required and this will add 2 working days to the lead time.
The color of polished and dyed polyamide models may vary slightly.
Velvet
The process of adding a velvet finish to your models is called flocking. First, a suitable adhesive is applied to the surface. Then, the flock is applied, penetrating the surface of the adhesive to create the desired velvet finish. It not only changes the way your model looks but also how it feels. Electrostatic flock applicators charge the flock particles, which are then attracted to the grounded surface they are attached to. The electrostatic charge ensures that all fibers end up standing at right angles to the surface, resulting in a velvet finish. Velvet fur is fairly resistant to friction.
This finish is available in Yellow, Ochre, Pink, Bordeaux, Green, Petrol Blue, Blue, and Black.
As with most post-production processes, extra labor is required and this will add 5 working days to the lead time.
Spray Paint (A-side)
We offer the possibility to spray-paint your model on one side (A-side). The finish is available in black or white.
As with most post-production processes, extra labor is required which will add 1 working day to the standard lead time.
Waterproof
For the sealing of your design, we process your polyamide part with an aqueous solution to fill small pores and close its outer surface or skin. Depending on the design, it is applied manually or by dipping the part.
This finish is only available in white.
As with most post-production processes, extra labor is required which will add 1 working day to the standard lead time.