Catwalk for bentonite desander 1-50 scale

Description

This is a catwalk base for bentonite mud desander ( https://i.materialise.com/en/shop/item/drilling-mud-desander-1-50-scale?Designer=gtmodels&SortBy=interesting&PageNumber=1&PageSize=4&Index=2 ). This accessory is 1:50 scale. MUD DESANDER AND HANDRAILS ARE NOT INCLUDED IN THIS ITEM!!

You have to use a thin brass net to make the galvanized or painted gratings (for example this one ABER S14 https://exito.site/en_GB/p/ABER-S14-Net-1%2C5-x-1%2C0-mm-75-x-42mm/17215 )

Each resin made element has to be cut from the supports then cleaned from the printing supports. You have to use a cutter or a surgical blade , after that it can be necessary to sand with fine sandpaper. 

No wash or chemical treatment is needed, once removed the supports you can use the primer (if you prefer) or directly paint the parts.