by GT Models
Description
This is a drilling mud (cement-bentonite suspension) pump. This can be used during slurry wall or big diameter piles construction to pump the bentonite mud to the tanks or the trench. This accessory is 1:50 scale.
Each resin made element has to be cut from the supports then cleaned from the printing supports. You have to use a cutter or a surgical blade , after that it can be necessary to sand with fine sandpaper.
No wash or chemical treatment is needed, once removed the supports you can use the primer (if you prefer) or directly paint the parts.
You can add more realism by adding a thin rubber wire as a connection to the electric motor and the cabinet.
Share or Embed
