by GT Models
Description
This is a containerized mixing unit for the preparation of Jet Grouting slurry. It can be coupled with one or two cement silo . This accessory is 1:50 scale and is NOT painted. Silo is NOT included.
Each resin made element has to be cut from the supports then cleaned from the printing supports. You have to use a cutter or a surgical blade , after that it can be necessary to sand with fine sandpaper.
No wash or chemical treatment is needed, once removed the supports you can use the primer (if you prefer) or directly paint the parts.
You can use some small rubber hose to link the turbomixer with rigid pipes and some thin steel rods to simulate the lifting piston of the side doors( see pictures attached).
Share or Embed
