by GT Models
Description
This is a guide frame for trench cutter Bauer BC40 from Bymo, there is also a valve that can be fitted on the mud suction hose. This accessory is 1:50 scale and is NOT painted.
Each resin made element has to be cut from the supports then cleaned from the printing supports. You have to use a cutter or a surgical blade , after that it can be necessary to sand with fine sandpaper.
No wash or chemical treatment is needed, once removed the supports you can use the primer (if you prefer) or directly paint the parts.
You can add more realism by adding a thin rubber wire as a connection to the hydraulic jacks and the hydraulic distributor on the machine.
Share or Embed
